Jump to: Edge-O-Dock Lever | Mechanical Dock Leveler
The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping is twenty-nine (29) inches, (29-13/16" with 30,000 lb. capacity), with a (36-5/8") inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation.
In order to help you find the right dock leveler, we provide this guide to measuring your dock door. Send it back to us and we will sizes for levelers and provide a quote. This will help you find the product you need and reduce confusion in the purchase process.
When finished, email it back here for a free quote.
The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.
The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. 115V, 1-phase power standard. Unit comes complete with motor, pump, control box, cylinder, lines, and oil. Truck must pull out for leveler to return to stored position.
|Model||Type||Usable Width||Capacity (lbs.)||Weight|
|PP-1572-36*||Hand Pump||72" Width||15,000||583|
|PP-2066||Hand Pump||66" Width||20,000||583|
|PP-2072||Hand Pump||72" Width||20,000||627|
|PP-2078||Hand Pump||78" Width||20,000||638|
|PP-2566||Hand Pump||66" Width||25,000||622|
|PP-2572||Hand Pump||72" Width||25,000||671|
|PP-2572-36*||Hand Pump||72" Width||25,000||1168|
|PP-3066||Hand Pump||66" Width||30,000||998|
|PP-3072||Hand Pump||72" Width||30,000||1061|
Mechanical Dock Levelers
The Mechanical Dock Levelers are constructed of heavy duty diamond plate deck (55,000 PSI) steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Lip is 16" long. Service range 12" above and below dock. Includes (2) 1014-4.5 laminated bumpers. Uniform capacities available up to 50,000 pounds.
|Model||Operation||Overall Size (Including Lip)||Wt. (lbs)|
|RR-65-20||Pull Chain||6' W x 5'4" L||1570|
|RR-66-20||Pull Chain||6' W x 6'4" L||1766|
|RR-68-20||Pull Chain||6'W x 8'4" L||2144|
|RR-610-20||Pull Chain||6' W x 10'4" L||2517|
|RR-75-20||Pull Chain||7' W x 5' 4" L||1766|
|RR-76-20||Pull Chain||7' W x 6'4" L||1970|
|RR-78-20||Pull Chain||7' W x 8'4"||2381|
|RR-710-20||Pull Chain||7' W x 10'4" L||2808|